4 Video Output Mode Optional
Press OSD joystick to switch the output mode:
- Default / Up for 5 seconds: CVBS 960H
- Right for 5 seconds: TVI
- Down for 5 seconds: CVI
- Left for 5 seconds: AHD
ZOSI 4-IN-1 Security Camera Specification
coaxial cable control via DVR directly
This is a hard wired security camera. It could not work with any PoE or Wireless Security System.
- Image Sensor: 1/3〞CMOS CMOS with IR-Cut.
- Active Pixels: 1920(H)×1080(V).
- Resolution: 1080P .
- Lens: 3.6mm
- LEDs Amount: 24pcs, 5mm LEDs
- Singal mode: TVI/AHD/CVI/CVBS 960H.
- IR Distance: up to 80ft
- Weather – Resistant
Weather resistant camera
Camera used high quality materials, can effectively prevent rust, water, etc. Can be installed outdoor or indoor.
1080p Full HD resolution
See everything in details with true 1080p HD resolution. Get clearer and smoother images/videos than 720p cameras.
Multiple Application Camera
It could be widely installed in home, store, office, school and any place. Protect your family, parents, baby, property and everything.
This 1080p full HD camera has a built-in OSD menu that can change the 4 different video outputs：HD-TVI, AHD, CVI, and CVBS(960H)， and adjust the video settings.
Switch from AHD: Press Leftward for 5 Seconds
Switch from TVI: Press Rightward for 5 Seconds
Switch from CVBS: Press Upward for 5 Seconds
Switch from CVI: Press Downward for 5 Seconds
Noted: Default Video Mode is Analog 960H Mode
Q: Video Loss appears where the image from my camera should be displaying on my DVR?
A: 1.Check the extension cable (power and video) is securely connected to the camera.
2.Check the video output from the camera is securely connected to a video input channel on the DVR.
3.Check the power from the camera is securely connected to a power supply.
4. The camera mode do not match your DVR.there is 2 ways to setup . (1) Press OSD Joystick “DOWN” 5 seconds,if still no picture come, try to press “LEFT” “RIGHT””UP” for 5 second, till the signal matching your DVR. (2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of the camera according to your DVRs video Mode.
|Compatible DVR||60ft CCTV Cable||More Details||More Details||More Details|
|Connection Type||BNC Cable||BNC / RCA connector||BNC Cable||BNC Cable||BNC Cable|
|DVR||8 channel DVR||/||8 channel DVR||8 channel DVR||16 channel DVR|
|Cameras||Support up to 8 cameras||Support one camera||4 cameras (Up to 8 cameras)||4 cameras (Up to 8 cameras)||12 cameras (Up to 16 cameras)|
|Hard Drive pre-installed||1TB security Hard Drive||/||1TB security Hard Drive||2TB security Hard Drive||2TB security Hard Drive|
Make sure this fits by entering your model number.
【2.0MP HD 1080P 4-IN-1 Security Camera】– This is 4-in-1 TVI/CVI/AHD/CVBS Bullet Camera. compatible with 960H,720P,1080P,3MP,5MP,8MP,4K HD-TVI, AHD, CVI, and CVBS/960H analog DVRs.
【Built in OSD Menu】– It comes with OSD Menu which can change 4 different video output. 1080P AHD, 1080P CVI, 1080P TVI and 960H CVBS. Default Video mode is 960H mode, compatible with all analog DVRs. 1080P video mode must be switched according to your 1080P DVR type. Widely Usage: With OSD Menu, you can change signal mode freely and quickly in 5 seconds.
【80ft Night Vision】 get a sharp and crisp image day or night with the camera’s automatic IR-CUT filter Up to 80ft night vision in total darkness and 130ft Night vision in ambient light.More than 3.0Lux the night vision is color.
【Indoor and Outdoor Use】– This camera use High Quality ABS material ,can withstand the toughest of outdoor conditions, Camera used high quality materials, can effectively prevent rust, can be installed in almost any outdoor or indoor place.
【NOTED】– This camera did not come with DVR, power supply &video power cable! 1, this is a hard-wired camera, it need to connect the cctv cable and power supply( NOT included). 2, this camera could not work seperately,it need to connect to the DVR to work